Vibration Reduction Controller for a Switched Reluctance Machine Based on HW/SW Partitioning - Archive ouverte HAL Access content directly
Journal Articles IEEE Transactions on Industrial Informatics Year : 2021

Vibration Reduction Controller for a Switched Reluctance Machine Based on HW/SW Partitioning

Abstract

This article presents a hardware/software implementation for the vibration reduction control of a switched reluctance machine (SRM). A mixed partitioning-based architecture is proposed to make full use of both microprocessor and field-programmable gate array (FPGA) resources. The aim of the proposed controller is to control directly the radial forces in the stator teeth allowing a significant vibration reduction compared to regular controller applied to SRM. However, if the control is software-only implemented, it suffers from performance degradation due to the high execution time required by this implementation solution. For this reason, the control system implementation is partitioned. The speed control is implemented using a microprocessor, while the current control and direct force control are implemented in FPGA. This solution provides high dynamic response especially needed to control the radial force and the currents. The effectiveness of the hybrid implementation is verified by experimental results.
No file

Dates and versions

hal-03273546 , version 1 (29-06-2021)

Identifiers

Cite

Man Zhang, Imen Bahri, Xavier Mininger, Cristina Vlad, Honqin Xie, et al.. Vibration Reduction Controller for a Switched Reluctance Machine Based on HW/SW Partitioning. IEEE Transactions on Industrial Informatics, 2021, 17 (6), pp.3879 - 3889. ⟨10.1109/TII.2020.3010375⟩. ⟨hal-03273546⟩
70 View
0 Download

Altmetric

Share

Gmail Facebook X LinkedIn More