Communication Dans Un Congrès Année : 2018

IMPACT OF LBM PROCESS DEFECTS ON MECHANICAL PROPERTIES OF AS7G06 ALUMINIUM ALLOY

IMPACT DES DÉFAUTS DU AU PROCÉDÉ LBM SUR LES PROPRIÉTÉS MÉCANIQUES DE L'ALLIAGE D'ALUMINIUM AS7G06

Résumé

This paper deals with the influence of the size of defects on the mechanical properties of AS7G06 samples manufactured by Laser Beam Melting (LBM). Among all the potential defects that could appear in the samples, porosity is the only one that can be created during the manufacturing process by mastering both size and orientation. The results reveal that, on the stress relieved samples, the porosity has no influence on the measured tensile mechanical properties, even when representing 3.5% of the cross section area, but for elongation at break which strongly decreases when increasing the size of the defect.

Cet article traite de l'influence de la taille des défauts sur les propriétés mécaniques d'échantillons en AS7G06 fabriqués par fusion laser (LBM). Parmi tous les défauts potentiels pouvant apparaître dans les échantillons, la porosité est le seul qui puisse être généré pendant le processus de fabrication en contrôlant à la fois sa taille et son orientation. Les résultats montrent que, sur les échantillons ayant subi un traitement de relaxation de contrainte, la porosité n'a aucune influence sur les propriétés mécaniques mesurées en traction, même lorsqu'elle représente 3,5 % de la section transversale, mais que l'allongement à la rupture diminue fortement lorsque la taille du défaut augmente.

Fichier principal
Vignette du fichier
#05 - 15thEcssmet 2018 - Impact of LBM Process Defects on Mech. Prop. of AS7G06.pdf (675.9 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Licence

Dates et versions

hal-05573371 , version 1 (31-03-2026)

Licence

Identifiants

  • HAL Id : hal-05573371 , version 1

Citer

Olivier Quénard, Philippe Guy, Olivier Dorival, Arnaud Votié, Sébastien Begoc. IMPACT OF LBM PROCESS DEFECTS ON MECHANICAL PROPERTIES OF AS7G06 ALUMINIUM ALLOY. 15th Ecssmet, European Conference on Spacecraft Structures, Materials and Environmental Testing, ESA-ESTEC; CNES; DLR, May 2018, Noordwijk, Netherlands. ⟨hal-05573371⟩
25 Consultations
5 Téléchargements

Partager

  • More