Depolymerization of fractionated wood by hydrothermal liquefaction - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2019

Depolymerization of fractionated wood by hydrothermal liquefaction

Résumé

Direct thermochemical conversion of lignocellulosic biomass produces a mixture of compounds that must be separated to produce purified building blocks. Moreover, lignin derived products have a detrimental effect on further biological conversion processes, such as fermentation. For all these reasons, it is important to develop an integrated approach for a better fractionation and valorisation of macromolecules (carbohydrates and lignin) in bio-refineries. In this work, wood is fractionated producing cellulose-rich pulps that are converted by hydrothermal liquefaction into fermentable sugars (Figure 1). For this purpose, beech has been delignified either by ethanol organosolv or by sodium chlorite/acetic acid (SC/AA) treatment, obtaining delignification yields of 50 and 91 wt. % respectively. The recovered pulps were then submitted to liquefaction in hot-compressed water (HCW). Three temperatures were studied: 180, 200 and 220ᵒC during 2 h. The same experiments were conducted on untreated beech and model cellulose (Avicel PH-101). Product yields and total carbohydrates were determined. The liquefaction products, i.e. solid residue, water soluble compounds and permanent gas, were analyzed respectively by X-ray diffraction (XRD), high performance anion-exchange chromatography with pulsed amperometric detector (HPAEC-PAD) and gas chromatography (GC). SC/AA treatment allowed a high recovery of hemicelluloses and for this reason, xylose content was significantly higher for the SC/AA pulp. The maximum yields of total carbohydrates, i.e. 13.7 and 36.8 wt.% from the organosolv and SC/AA pulp respectively, were found when the liquefaction temperature was 220ᵒC.
Fichier principal
Vignette du fichier
BUENDIA-KANDIA, Felipe - Hydrothermal depolymerization of wood pulps.pdf (365.07 Ko) Télécharger le fichier
Depolymerization of fractionated wood by hydrothermal liquefactio.pdf (2.33 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04518900 , version 1 (24-03-2024)

Identifiants

  • HAL Id : hal-04518900 , version 1

Citer

Felipe Buendia, Nicolas Brosse, Mauviel Guillain, Anthony Dufour. Depolymerization of fractionated wood by hydrothermal liquefaction. Pyroliq 2019: Pyrolysis and Liquefaction of Biomass and Wastes, Franco Berruti, Jun 2019, Cork, Ireland. ⟨hal-04518900⟩
0 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More