Gold-coated nanoripples produced by UV-Femtosecond lasers for surface enhanced Raman spectroscopy - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Applied Surface Science Année : 2023

Gold-coated nanoripples produced by UV-Femtosecond lasers for surface enhanced Raman spectroscopy

Résumé

Femtosecond (fs) lasers have been recognized as a powerful tool for micro/nanofabrication, due to their advantages of high flexibility, high repeatability, and minimal introduction of heat. Many studies have been made to employ fs laser processing in fabrication of nanostructures on substrates for surface-enhanced Raman spectroscopy (SERS). However, there have been few reports of ultraviolet (UV)-fs-laser-induced nanoripples for SERS experiments. In this study, we developed simple, easy-to-prepare, and large-active-area SERS substrates using UV-fs laser irradiation. Nanoripples induced in open air by the UV-fs laser on Silicon (Si) substrates with gold coatings were used as SERS-active substrates. Nanoripple evolution by the UV-fs laser was explored to establish the processing windows for nanoripple formation as functions of laser fluence and hatching distances. Moreover, SERS enhancement factors (EFs) were correlated with the laser induced nanoripple patterns. SERS EFs up to 2.4 × 107 were achieved for Rhodamine 6G (R6G) molecules on the laser-textured Si substrates with Au coatings of 34 nm thick. The average period of nanoripples for the highest SERS EF is 253 nm, fabricated by a laser fluence of 0.48 J/cm2 and a hatching distance of 38 µm. R6G concentration down to 10−9 mol/L was detected on the laser-textured Si substrate. Besides Si substrates, three other materials, stainless steel, glass, and polystyrene, were also investigated for nanoripple formation and SERS measurements. Nanoripple structures were formed on stainless-steel surfaces and the highest SERS EF of 1.5 × 107 was achieved. For glass and polystyrene substrates, no nanoripple structures were found. As a result, the SERS EFs (∼106) of glass and polystyrene are one order of magnitude lower than those of the Si and stainless-steel substrates. The SERS demonstration using these materials further supports the mechanisms of nanoripple formation and provides a foundation to make UV-fs laser processing an effective technique for SERS applications using various materials. Applications for Sudan I, small extracellular vesicles (sEVs), and glucose were explored and demonstrated the capability of the SERS substrates.

Domaines

Matériaux
Fichier principal
Vignette du fichier
LiNan_ApplSurfaceSci_2023.pdf (2.71 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04185186 , version 1 (22-08-2023)

Identifiants

Citer

Nan Li, Xi Huang, Haoyu Dong, Bin Duan, Qiuchi Zhu, et al.. Gold-coated nanoripples produced by UV-Femtosecond lasers for surface enhanced Raman spectroscopy. Applied Surface Science, 2023, 636, pp.157794. ⟨10.1016/j.apsusc.2023.157794⟩. ⟨hal-04185186⟩
21 Consultations
24 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More