Kinematic Synthesis and Analysis of the RoboMech Class Parallel Manipulator with Two Grippers - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Robotics Année : 2021

Kinematic Synthesis and Analysis of the RoboMech Class Parallel Manipulator with Two Grippers

Résumé

In this paper, methods of kinematic synthesis and analysis of the RoboMech class parallel manipulator (PM) with two grippers (end effectors) are presented. This PM is formed by connecting two output objects (grippers) with a base using two passive and one negative closing kinematic chains (CKCs). A PM with two end effectors can be used for reloading operations of stamped products between two adjacent main technologies in a cold stamping line. Passive CKCs represent two serial manipulators with two degrees of freedom, and negative CKC is a three-joined link with three negative degrees of freedom. A negative CKC imposes three geometric constraints on the movements of the two output objects. Geometric parameters of the negative CKC are determined on the basis of the problems of the Chebyshev and least-square approximations. Problems of positions and analogues of velocities and accelerations of the PM with two end effectors have been solved.
Fichier principal
Vignette du fichier
robotics-10-00099.pdf (2.09 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte
Licence : CC BY - Paternité

Dates et versions

hal-04086598 , version 1 (02-05-2023)

Identifiants

Citer

Zhumadil Baigunchekov, Med Amine Laribi, Azamat Mustafa, Abzal Kassinov. Kinematic Synthesis and Analysis of the RoboMech Class Parallel Manipulator with Two Grippers. Robotics, 2021, 10 (3), pp.99. ⟨10.3390/robotics10030099⟩. ⟨hal-04086598⟩
7 Consultations
9 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More