Application of Analytical Modeling of Flashover Derived for Flat Samples to Polluted 11-kV SiR Insulators - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue IEEE Transactions on Dielectrics and Electrical Insulation Année : 2022

Application of Analytical Modeling of Flashover Derived for Flat Samples to Polluted 11-kV SiR Insulators

Mohammed El Amine Slama
A. Manu Haddad

Résumé

This article introduces a complementary criterion for flashover (FOV) of polluted insulators based on the concept of equivalent impedance variation with discharge length and leakage current. An analytical electrothermal model enabling the calculation of critical FOV voltage and critical current of polluted insulators is developed using this complementary criterion and the equivalent impedance criterion. It is shown that the critical parameters depend on the thermal characteristic of the discharge and the components of the equivalent electrical circuit. The comparison of the computed FOV voltage and critical current is in good accordance with the experimental ones for a laboratory insulation flat sample model with different applied voltage waveforms. The application of the developed model to actual insulators destined for 11-kV systems, by including equivalent salt density deposit (ESDD) and the form factor, shows that FOV voltage values match very well with the experimental data in clean fog test conditions.
Fichier non déposé

Dates et versions

hal-04073897 , version 1 (19-04-2023)

Identifiants

Citer

Mohammed El Amine Slama, Abderrahmane Beroual, A. Manu Haddad, Maurizio Albano. Application of Analytical Modeling of Flashover Derived for Flat Samples to Polluted 11-kV SiR Insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 2022, 29 (4), pp.1574-1581. ⟨10.1109/TDEI.2022.3175152⟩. ⟨hal-04073897⟩
32 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More