Experimental and numerical study of the accuracy of flame-speed measurements for methane/air combustion in a slot burner - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Combustion and Flame Année : 2011

Experimental and numerical study of the accuracy of flame-speed measurements for methane/air combustion in a slot burner

Résumé

Measuring the velocities of premixed laminar flames with precision remains a controversial issue in the combustion community. This paper studies the accuracy of such measurements in two-dimensional slot burners and shows that while methane/air flame speeds can be measured with reasonable accuracy, the method may lack precision for other mixtures such as hydrogen/air. Curvature at the flame tip, strain on the flame sides and local quenching at the flame base can modify local flame speeds and require correc- tions which are studied using two-dimensional DNS. Numerical simulations also provide stretch, dis- placement and consumption flame speeds along the flame front. For methane/air flames, DNS show that the local stretch remains small so that the local consumption speed is very close to the unstretched premixed flame speed. The only correction needed to correctly predict flame speeds in this case is due to the finite aspect ratio of the slot used to inject the premixed gases which induces a flow acceleration in the measurement region (this correction can be evaluated from velocity measurement in the slot section or from an analytical solution). The method is applied to methane/air flames with and without water addition and results are compared to experimental data found in the literature. The paper then discusses the limitations of the slot-burner method to measure flame speeds for other mixtures and shows that it is not well adapted to mixtures with a Lewis number far from unity, such as hydrogen/air flames.
Fichier principal
Vignette du fichier
Selle_9148.pdf (380.07 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03537493 , version 1 (20-01-2022)

Identifiants

Citer

Laurent Selle, Thierry Poinsot, Bernard Ferret. Experimental and numerical study of the accuracy of flame-speed measurements for methane/air combustion in a slot burner. Combustion and Flame, 2011, 158 (1), pp.146-154. ⟨10.1016/j.combustflame.2010.08.003⟩. ⟨hal-03537493⟩
10 Consultations
22 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More