Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Mechanics & Industry Année : 2019

Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication

Résumé

This paper presents an approach for the measurement of a liquid film thickness in contact with a rough surface, based on electrical conductance sensor. This type of sensor consists of two electrodes mounted flush on a wall and using an electrolyte solution representing the liquid film. Assessing of the generated current between a pair of electrode is used as a measure of the film thickness. The liquid film is contained between two parallel surfaces that one of which is coated with a certain roughness, while the other is smooth. The electrical probes are placed on the smooth surface and the facing rough surface is removable allowing a free move of the wall. In this way, a rotational or a sliding motion is imposed on the rough wall allowing a browse of an entire surface relative to the electrode, in order to determine the influence of roughness on the film thickness measurements. In addition, series of signal acquisition were carried out with imposed pressures on the upper plate for the characterization of the effect of the film compression on the measured thicknesses. The principle of this electrochemical technique is briefly explained, as well as how the lateral distance between the electrodes impacts the measuring range limit. The experimental setup is described and used to study the liquid film flow with several configurations of the wall surface. The obtained results demonstrated the feasibility of this type of non-intrusive estimation, as it was possible to estimate the variable film thickness which is depending on the peaks and valleys of the rough surface. This is promising, because measuring this parameter remains difficult. Finally, the results analysis allows to synthesize the advantages and limitations of this method.
Fichier principal
Vignette du fichier
mi190011.pdf (2.94 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte
Licence : CC BY - Paternité

Dates et versions

hal-03341975 , version 1 (14-04-2022)

Licence

Paternité

Identifiants

Citer

Fethi Aloui, Lamia Gaied, Wafik Abassi, Marc Lippert, Maxence Bigerelle. Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication. Mechanics & Industry, 2019, 20 (6), pp.601. ⟨10.1051/meca/2019035⟩. ⟨hal-03341975⟩
35 Consultations
20 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More