Numerical investigation of plastic flow and residual stresses generated in hydroformed tubes - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications Année : 2021

Numerical investigation of plastic flow and residual stresses generated in hydroformed tubes

Résumé

During tube hydroforming process, the friction conditions between the tube and the die have a great importance on the material plastic flow and the distribution of residual stresses of the final component. Indeed, a three-dimensional finite element model of a tube hydroforming process in the case of square section die has been performed, using dynamic and static approaches, to study the effect of the friction conditions on both plastic flow and residual stresses induced by the process. First, a comparative study between numerical and experimental results has been carried out to validate the finite element model. After that, various coefficients of friction were considered to study their effect on the thinning phenomenon and the residual stresses distribution. Different points have been retained from this study. The thinning is located in the transition zone cited between the straight wall and the corner zones of hydroformed tube due to the die–tube contact conditions changes during the process. In addition, it is clear that both die–tube friction conditions and the tube bending effects, which occurs respectively in the tube straight wall and corner zones, are the principal causes of the obtained residual stresses distribution along the tube cross-section.
Fichier principal
Vignette du fichier
MSMP_JMDA_2021_KTARI.pdf (2.08 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03199135 , version 1 (15-04-2021)

Identifiants

Citer

A Ktari, A Abdelkefi, N Guermazi, P Malecot, N Boudeau. Numerical investigation of plastic flow and residual stresses generated in hydroformed tubes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2021, 235 (5), pp.1100-1111. ⟨10.1177/1464420721989746⟩. ⟨hal-03199135⟩
52 Consultations
85 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More