Characterization of CrAlN Films Synthesized by DC Reactive Magnetron Sputtering - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Lecture Notes in Mechanical Engineering Année : 2021

Characterization of CrAlN Films Synthesized by DC Reactive Magnetron Sputtering

Résumé

CrAlN films were synthesized by DC reactive magnetron sputtering. The influence of the aluminium content on the microstructure, hardness and the friction coefficient of the CrAlN films have been investigated. Results indicate that all CrAlN coatings present a columnar and dense structure. Also, CrAlN coatings present a better hardness than CrN coating. The increase of Al rate from 3.5 to 11% is accompanied by a decrease of hardness from 28 to 24 GPa and then it increases for an Al rate of 24%. The addition of Al to the CrN system causes an increase of the friction coefficient and the wear resistance.
Fichier principal
Vignette du fichier
LaBoMaP_ICAMEM_2021_NOUVEAU.pdf (1.05 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03079859 , version 1 (17-12-2020)

Identifiants

Citer

Khalil Aouadi, Aurélien Besnard, Brahim Tlili, Moez Chafra, Corinne Nouveau, et al.. Characterization of CrAlN Films Synthesized by DC Reactive Magnetron Sputtering. Lecture Notes in Mechanical Engineering, 2021, pp.291-298. ⟨10.1007/978-3-030-52071-7_40⟩. ⟨hal-03079859⟩
31 Consultations
63 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More