The Extended Kanban System for Production Control of Assembly Systems - Archive ouverte HAL Accéder directement au contenu
Rapport (Rapport De Recherche) Année : 1998

The Extended Kanban System for Production Control of Assembly Systems

Kanban étendu pour la gestion de production de systèmes d'assemblage

Claudine Chaouiya
George Liberopoulos
  • Fonction : Auteur

Résumé

In many manufacturing systems, production of parts proceeds in stages. An important managerial concern is how to control the flow of parts through the stages. In many systems this is done by implementing a pull control policy, that is, a policy that decides when to produce parts based on when customer demands arrive to the system. A significant amount of work has been devoted to this issue for serial systems, i.e., systems consisting of stages in series. Different pull control mechanisms have been proposed in the literature, among which the Base Stock Control System (BSCS) the Kanban Control System (KCS) and the Generalized Kanban Control System (GKCS) are of special interest. Recently a new control mechanism referred to as the Extended Kanban Control System (EKCS) was introduced. The purpose of this paper is to generalize the EKCS to assembly structures. It turns out that we need to define two different control policies depending on whether parts are transferred simultaneously or independently into the assembly stage. This leads to the definition of the Simultaneous Extended Kanban Control System (SEKCS) and the Independent Extended Kanban Control System (IEKCS). Properties and comparisons of these two control mechanisms are presented.
Dans les systèmes de manufacture, l'ensemble des activités de production est en général décomposé en un ensemble de mailles de production (ou étages). Se pose alors le problème du contrôle du flux des pièces dans les différents étages de production. Ce contrôle peut être réalisé en mettant en oeuvre une politique de flux tirés qui coordonne le lancement des pièces dans les mailles de production avec l'arrivée des demandes. De nombreux travaux traitent de ce problème pour le cas de systèmes en série (c'est-à-dire de systèmes décomposés en un ensemble d'étages en série). Différents systèmes à flux tirés ont été proposés parmi lesquels le système à stock nominal (Base Stock Control), le système kanban, le système kanban généralisé et enfin le système kanban étendu. L'objectif de ce travail est de généraliser le kanban étendu au cas de structures d'assemblage. Nous sommes amenés à définir deux politiques différentes selon que les pièces entrent simultanément ou indépendamment dans la maille d'assemblage. Nous présentons le kanban étendu simultané et le kanban étendu indépendant. Nous étudions les propriétés de ces deux mécanismes et nous les comparons.
Fichier principal
Vignette du fichier
lip6.1998.024.pdf (206.16 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02547737 , version 1 (20-04-2020)

Identifiants

  • HAL Id : hal-02547737 , version 1

Citer

Claudine Chaouiya, George Liberopoulos, Yves Dallery. The Extended Kanban System for Production Control of Assembly Systems. [Research Report] lip6.1998.024, LIP6. 1998. ⟨hal-02547737⟩
21 Consultations
40 Téléchargements

Partager

Gmail Facebook X LinkedIn More