Article Dans Une Revue Latin American Journal of Solids and Structures Année : 2017

Determination of forming limit diagrams based on ductile damage models and necking criteria

Résumé

In this paper, forming limit diagrams (FLDs) for an aluminum alloy are predicted through numerical simulations using various localized necking criteria. A comparative study is conducted for the FLDs determined by using the Lemaitre damage approach and those obtained with the modified Gurson–Tvergaard–Needleman (GTN) damage model. To this end, both damage models coupled with elasto-plasticity and accounting for plastic anisotropy have been implemented into the ABAQUS/Explicit software, through the user-defined subroutine VUMAT, within the framework of large plastic strains and a fully three-dimensional formulation. The resulting constitutive frameworks are then combined with four localized necking criteria to predict the limit strains for an AA6016-T4 aluminum alloy. Three of these necking criteria are based on finite element (FE) simulations of the Nakazima deep drawing test with various specimen geometries, while the fourth criterion is based on bifurcation theory. The simulation results reveal that the limit strains predicted by local criteria, which are based on FE simulations of the Nakazima test, are in good agreement with the experiments for a number of strain paths, while those obtained with the bifurcation analysis provide an upper bound to the experimental FLD.

Fichier principal
Vignette du fichier
LEM3_LAJSS_2017_CHALAL.pdf (579.98 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Licence
Loading...

Dates et versions

hal-02385802 , version 1 (29-11-2019)

Licence

Identifiants

Citer

Hocine Chalal, Farid Abed-Meraim. Determination of forming limit diagrams based on ductile damage models and necking criteria. Latin American Journal of Solids and Structures, 2017, 14 (10), pp.1872-1892. ⟨10.1590/1679-78253481⟩. ⟨hal-02385802⟩
116 Consultations
213 Téléchargements

Altmetric

Partager

  • More