Comparison of the moisture damage of bituminous binder coupled with glass and limestone substrate using pull-off test - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Canadian journal of civil engineering Année : 2019

Comparison of the moisture damage of bituminous binder coupled with glass and limestone substrate using pull-off test

Résumé

In this paper, the moisture susceptibility of different bituminous binders with two substrates (glass and limestone) was investigated. To that end, the tensile strength of different combinations of bituminous binder–substrate bond was measured using a pull-off test. This test was adapted from the pneumatic adhesion tensile testing instrument (PATTI) test to improve repeatability. Samples were tested in dry condition and after a 7-day conditioning in hot water bath (60 °C). An analysis of variance (ANOVA) was performed on the test results. Overall, the results show that in dry condition, the pull-off strength is a function of the bituminous binder type rather than of the substrate type. After water conditioning, an increase in the pull-off strength was observed for the bituminous binder without polymers and coupled with glass substrate. This was associated with an increase in binder stiffness. For the limestone substrate, the effect of water conditioning was significant only for one type of binder.

Domaines

Génie civil
Fichier principal
Vignette du fichier
ELT2019.pdf (322.21 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-02378192 , version 1 (01-12-2023)

Identifiants

Citer

Éric Lachance-Tremblay, Michel Vaillancourt, Daniel Perraton, Hervé Di Benedetto. Comparison of the moisture damage of bituminous binder coupled with glass and limestone substrate using pull-off test. Canadian journal of civil engineering, 2019, 46 (3), pp.188-194. ⟨10.1139/cjce-2018-0152⟩. ⟨hal-02378192⟩
33 Consultations
8 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More