Flow Induced Pulsations (FLIP) in 6-inch rough bore gas flexible pipes Test - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2018

Flow Induced Pulsations (FLIP) in 6-inch rough bore gas flexible pipes Test

Résumé

Since the beginning of the 21 st century FLow-Induced Pulsations (FLIP) has been more and more experienced. The phenomenon is characterized by an acoustic wave that is created inside of the flexible pipe and that may lead to significant fatigue failure of the adjacent equipment. Flexible pipe integrity is not called into question regarding this phenomenon. In this context, a FLIP joint test involving an Oil Company, a Flexible Pipe supplier and a French research center was conducted end of 2016 at French laboratory in Poitiers. The test was performed in a 6'' internal diameter and 18-meter-long flexible pipe. Both flow directions were tested to assess the influence of the rounded edges of the carcass. On the one hand, this paper presents the experimental test setup and the main results that came out of the test. On the other hand, this paper also presents the comparison between tests results and analytical model outcome. Moreover, combining experiments and theoretical point of view enabled reproducing the phenomenon. A better understanding of the phenomenon will allow flexible pipes suppliers to propose mitigations or cancellation of FLIP to companies.
Fichier principal
Vignette du fichier
OTC-28681-MS.pdf (2.18 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-02370307 , version 1 (19-11-2019)

Identifiants

  • HAL Id : hal-02370307 , version 1

Citer

Matthieu Décuupère, David Charliac, Jean-Philippe Roques, Alexandre Karnikian, Gaëtan Galeron, et al.. Flow Induced Pulsations (FLIP) in 6-inch rough bore gas flexible pipes Test. Offshore Technology Conference, Apr 2018, Houston, United States. ⟨hal-02370307⟩
56 Consultations
577 Téléchargements

Partager

Gmail Facebook X LinkedIn More