Laser welding of titanium alloys with an Yb: YAG sisk source - Archive ouverte HAL Access content directly
Journal Articles Materials Science Forum Year : 2018

Laser welding of titanium alloys with an Yb: YAG sisk source

Abstract

In this paper, the laser welding of thin titanium sheet in a butt joint configuration are investigated using a continuous Yb: YAG disk source, with high beam quality and a particular fiber configuration, enable to provide a broad range of beam diameters with different intensity distribution. The thermal efficiency of the laser process is discussed as a function of the fiber type. The weldability results for the CP Ti grade 2 and the Ti-6Al-4V titanium alloy are expressed in terms of full penetration, and correct bead geometry (NF L06-395-2000). Full penetration welds are easily achieved with the core fiber, but the outer fiber produces welds with limited geometric defects. Butt joints microstructure consists of an acicular α phase in the fusion zone for CP Ti, and a martensitic α’ phase for the Ti-6Al-4V alloy. Tensile test results confirm a similar or slightly higher joint strength for the full penetration welds, compared with the parent metal.
Fichier principal
Vignette du fichier
Beguin_21846.pdf (988 Ko) Télécharger le fichier
Origin : Files produced by the author(s)
Loading...

Dates and versions

hal-02356317 , version 1 (08-11-2019)

Identifiers

Cite

Jean-Denis Béguin, Valentin Gazagne, Yannick Balcaen, Joël Alexis, Eric Andrieu. Laser welding of titanium alloys with an Yb: YAG sisk source. Materials Science Forum, 2018, 941, pp.845-850. ⟨10.4028/www.scientific.net/MSF.941.845⟩. ⟨hal-02356317⟩
40 View
72 Download

Altmetric

Share

Gmail Facebook X LinkedIn More