Design of a Compliant Gripper With Multimode Jaws - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Mechanisms and Robotics Année : 2018

Design of a Compliant Gripper With Multimode Jaws

Résumé

This paper presents the design of a multi-mode compliant gripper, using the singularities of the four-bar mechanism with equilateral links. The mobility of the compliant gripper can be reconfigurable to grasp a variety of shapes or adapt to specific requirements. The compliant gripper is a compact and two-layer structure. Two linear actuators are required to enable the multiple operation modes, by the conversion of two pairs of slider-crank mechanisms. A multi-mode compliant four-bar mechanism is first presented and kinematically analysed. The design and the kinetostatic modelling of the resulting compliant gripper are then performed. Finally, the analysis of the reconfigurable compliant gripper under different actuation schemes is carried out, including the comparison of the results obtained from analytical modelling, finite element analysis and experimental testing.
Fichier principal
Vignette du fichier
ASME_JMR_2018_Hao_Li_Nayak_Caro_HAL.pdf (1.89 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01757250 , version 1 (03-04-2018)

Identifiants

Citer

Guangbo Hao, Haiyang Li, Abhilash Nayak, Stéphane Caro. Design of a Compliant Gripper With Multimode Jaws. Journal of Mechanisms and Robotics, 2018, 10 (3), ⟨10.1115/1.4039498⟩. ⟨hal-01757250⟩
208 Consultations
408 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More