Elaboration of low viscosity and high impact polypropylene blends through reactive extrusion - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Polymer Engineering and Science Année : 2016

Elaboration of low viscosity and high impact polypropylene blends through reactive extrusion

Résumé

In this work, a reactive high flow polypropylene, PP800 ((0)=40 Pas, 190 degrees C), is extruded with a commercial compound of polypropylene and ethylene-propylene random copolymer ((0)=3000 Pas, 190 degrees C). On one hand, the fluidity of resulting blends is highly increased but, on the other hand, matrix degradation leads to a strong decrease of the impact behavior and tensile strain. Then, the addition of 10 wt% of propylene-based copolymer (PBC) leads to a very interesting impact enhancement while keeping high fluidity. A study of morphological, thermal, and dynamical thermal mechanical properties reveal the anchoring of semi crystalline propylene segments of PBC droplets at the interface with the PP matrix. On the contrary, the addition of ethylene-based copolymer (EBC) is not able to restore satisfactory impact properties.

Dates et versions

hal-01396615 , version 1 (14-11-2016)

Identifiants

Citer

Camille Josse, Valérie Massardier, Lhoussain Khrouz, Philippe Cassagnau, Fréderic Viot. Elaboration of low viscosity and high impact polypropylene blends through reactive extrusion. Polymer Engineering and Science, 2016, 56, pp.418-426. ⟨10.1002/pen.24267⟩. ⟨hal-01396615⟩
71 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More