Numerical simulation of workpiece thermal field in drilling CFRP/Aluminum alloy - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Key Engineering Materials Année : 2014

Numerical simulation of workpiece thermal field in drilling CFRP/Aluminum alloy

Résumé

Temperature reached at the tool/workpiece interface is difficult to measure during drilling operation, due to its enclosed configuration; numerical simulation is therefore a good alternative to access to this information. The purpose of this study is to develop and carry out numerical simulations in order to estimate the workpiece thermal field generated during drilling. The simulations are validated by comparing simulated and measured temperatures at 4 mm from the holes wall. This method is applied to evaluate thermal field generated during drilling (with chip removing cycles) of CFRP/Aluminum alloy stacks. The influence of the drilling kinematics on the workpiece thermal field is also investigated.
Fichier principal
Vignette du fichier
I2M_KEM_Montoya_2014.pdf (1.26 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01203182 , version 1 (22-09-2015)

Identifiants

Citer

Maxime Montoya, Madalina Calamaz, Daniel Gehin, Franck Girot. Numerical simulation of workpiece thermal field in drilling CFRP/Aluminum alloy. Key Engineering Materials, 2014, 611-612, pp.1226-1235. ⟨10.4028/www.scientific.net/KEM.611-612.1226⟩. ⟨hal-01203182⟩
82 Consultations
118 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More