Structural mechanical testing of a full-size adhesively bonded motorboat - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment Année : 2004

Structural mechanical testing of a full-size adhesively bonded motorboat

Résumé

This paper describes the tests performed on a full-size motorboat to demonstrate the potential for adhesive bonding to replace overlaminated connections. Adhesive bonding resulted in a significant reduction in assembly time for bulkhead connections compared with overlamination. Drop tests and sea trials were performed using specially adapted strain gauge instrumentation. These indicated low adhesive joint strain levels, even for severe test conditions. No damage was observed. The data obtained will be used to improve laboratory test procedures to simulate service loading of boat structures.
Fichier principal
Vignette du fichier
PBAR.pdf (297.77 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01007334 , version 1 (29-11-2017)

Identifiants

Citer

P. Baur, A. Roy, Pascal Casari, Dominique Choqueuse, Peter Davies. Structural mechanical testing of a full-size adhesively bonded motorboat. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2004, 218 (4), pp.259-265. ⟨10.1177/147509020421800405⟩. ⟨hal-01007334⟩
73 Consultations
238 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More