Prediction of Springback After Draw-Bending Test Using Different Material Models - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2010

Prediction of Springback After Draw-Bending Test Using Different Material Models

Sever-Gabriel Racz
  • Fonction : Auteur correspondant
  • PersonId : 916920

Connectez-vous pour contacter l'auteur
Salim Khan
  • Fonction : Auteur
  • PersonId : 916921
Hocine Chalal
Farid Abed-Meraim
Tudor Balan
  • Fonction : Auteur
  • PersonId : 916894

Résumé

Within the framework of sheet metal forming, the importance of hardening models for springback predictions has been often emphasized. While some specific applications require very accurate models, in many common situations simpler (isotropic hardening) models may be sufficient. In these conditions, investigation of the impact of hardening models requires well defined test configurations and accurate measurements to generate the reference data. Specific draw-bend tests have been especially conceived for this purpose. In this work, such a draw-bending experimental device has been designed, for use on a biaxial tension machine. Three different steel sheets have been tested (one mild steel sheet and two HSS sheets) with thicknesses between 0.8 and 2 mm. Up to three different back-force levels were used for the tests. Wall curvatures and springback angles were measured. Finite element simulations of the tests were performed. A parameter sensitivity analysis has been carried out in order to determine the numerical parameters ensuring accurate springback results. The tests were simulated using an isotropic hardening model and a combined isotropic-kinematic hardening model. The impact of the hardening model is explored for the various test configurations and conclusions are drawn concerning their relative importance.
Fichier non déposé

Dates et versions

hal-00656289 , version 1 (03-01-2012)

Identifiants

Citer

Sever-Gabriel Racz, Salim Khan, Hocine Chalal, Farid Abed-Meraim, Tudor Balan. Prediction of Springback After Draw-Bending Test Using Different Material Models. International Conference on Advances in Materials and Processing Technologies, Oct 2010, Paris, France. pp.419-424, ⟨10.1063/1.3552481⟩. ⟨hal-00656289⟩
77 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More