Pantopteron-4: a New 3T1R Decoupled Parallel Manipulator for Pick-and-Place Applications - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Mechanism and Machine Theory Année : 2010

Pantopteron-4: a New 3T1R Decoupled Parallel Manipulator for Pick-and-Place Applications

Résumé

In this paper, a novel 4-DOF decoupled parallel manipulator with Schoenflies motions, called the Pantopteron-4, is presented. This manipulator is able to perform the same movements as the Isoglide4 or the Quadrupteron, but, due to its architecture which is made of three pantograph linkages, an amplification of the movements between the actuators and the platform displacements is achieved. Therefore, having the same actuators for both robots, the Pantopteron-4 displaces (theoretically) many-times faster than the Isoglide4 or the Quadrupteron, depending on the magnification factor of the pantograph linkages. Thus, this mechanism is foreseen to be used in applications where the velocities and accelerations have to be high, as in pick-and-place. First, the kinematics of the Pantopteron-4 is presented. Then, its workspace is analyzed. Finally, a prototype of the mechanism is shown and conclusions are given.
Fichier principal
Vignette du fichier
SubmittedPaperR3.pdf (961.9 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00459831 , version 1 (25-06-2019)

Identifiants

  • HAL Id : hal-00459831 , version 1

Citer

Sébastien Briot, Ilian Bonev. Pantopteron-4: a New 3T1R Decoupled Parallel Manipulator for Pick-and-Place Applications. Mechanism and Machine Theory, 2010, 45 (5), pp.707-721. ⟨hal-00459831⟩
117 Consultations
174 Téléchargements

Partager

Gmail Facebook X LinkedIn More