Anisotropy and Clausius-Clapeyron relation for forward and reverse stress-induced martensitic transformations in polycrystalline NiTi thin walled tubes - BioMMAT
Article Dans Une Revue Mechanics of Materials Année : 2020

Anisotropy and Clausius-Clapeyron relation for forward and reverse stress-induced martensitic transformations in polycrystalline NiTi thin walled tubes

Résumé

Inside the Clausius-Clapeyron regime, transformation stresses during supere-lastic tensile tests of polycrystalline shape memory alloys are linearly dependent on temperature, with coefficients being the slopes of the forward and reverse transformation lines. In this work, experiments are performed to investigate the anisotropy of the slopes of the forward and reverse transformation stress-temperature lines in a NiTi superelastic thin walled tube. The classical Clausius-Clapeyron relation is widely used to model these slopes, although, in a strict sense, this relation is defined at thermodynamic equilibrium. Experimental results disagree with the widely used classical Clausius-Clapeyron relation in two points: (i) that there should be no difference between slopes for forward and reverse transformations and (ii) that the products of the slopes by the transformation strains should not depend on orientation, since the remaining terms (mass density and entropy change) are not orientation dependent. A modified "Clausius-Clapeyron" relation is then proposed, better suited to model the anisotropy of the slopes of stress-temperature transformation lines of forward and reverse in superelastic NiTi. This modification is based on a unified thermodynamic theory of thermoelastic martensitic transformation in which irreversible energies are accounted as a sum of stored elastic energy and dissipated energy. The modified "Clausius-Clapeyron" relation is obtained by expressing that this irreversible energy is temperature dependent and that this temperature dependence is dependent on the orientation.
Fichier principal
Vignette du fichier
Article1_Grassi_Chagnon_Oliveira_Favier.pdf (7.51 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02537803 , version 1 (09-04-2020)
hal-02537803 , version 2 (14-04-2020)

Identifiants

Citer

Estephanie Nobre Dantas Grassi, Grégory Chagnon, Henrique Martinni Ramos de Oliveira, Denis Favier. Anisotropy and Clausius-Clapeyron relation for forward and reverse stress-induced martensitic transformations in polycrystalline NiTi thin walled tubes. Mechanics of Materials, 2020, 146, ⟨10.1016/j.mechmat.2020.103392⟩. ⟨hal-02537803v2⟩
2107 Consultations
205 Téléchargements

Altmetric

Partager

More