Article Dans Une Revue Chemical Science International Journal Année : 2021

Optimization of the Production of Ethylene Di-Amine Tetra-Acetic Acid Modified Activated Carbon using Palm Kernel Shell for the Adsorption of Copper ion

Résumé

Biomass-based activated carbon has received large attention due to its excellent characteristics such as inexpensiveness, good absorption behaviour, and potential to reduce strong dependence towards non-renewable precursors. The potential use of Palm Kernel Shell in modified activated carbon was evaluated by using the Response Surface Methodology. In this study, a 23 three-level Central Composite Design (CCD) was used to develop a statistical model for the optimization of process variables, contact time (10-130mins) X1, pH (5.0 – 8.0) X2, and adsorbent dose (0.4 -5.0g) X3. The investigation shows that Ethylene Di-Amine Tetra-Acetic Acid modified activated carbon prepared from Palm Kernel Shell is a promising adsorbent for the removal of copper ions from aqueous solutions over a wide range of concentrations with an optimized efficiency of 99% at the solution pH of 7.2, contact time of 70 minutes and adsorbent dose of 2.1g/L. The adsorption results are in line with the linear and quadratic model representation, which is evident from the models for optimization of copper ions.

Domaines

Fichier non déposé

Dates et versions

hal-05348731 , version 1 (05-11-2025)

Identifiants

  • HAL Id : hal-05348731 , version 1

Citer

Y Yerima, I Eiroboyi, I Eiroboyi. Optimization of the Production of Ethylene Di-Amine Tetra-Acetic Acid Modified Activated Carbon using Palm Kernel Shell for the Adsorption of Copper ion. Chemical Science International Journal, 2021, 30 (4), pp.1-11. ⟨hal-05348731⟩
14 Consultations
0 Téléchargements

Partager

  • More