Detection of Bearing Spa fling Faults Using IAS Monitoring System - Experimental Studies on the Influence of Operating and Environmental Parameters - Archive ouverte HAL
Communication Dans Un Congrès Année : 2013

Detection of Bearing Spa fling Faults Using IAS Monitoring System - Experimental Studies on the Influence of Operating and Environmental Parameters

Résumé

Experimental works carried out in recent years have demonstrated the feasibility of detecting a bearing fault through the spectral analysis of the Instantaneous Angular Speed (IAS) in the angular domain. Since these works have been carried out on complex mechanical systems (automotive gearboxes, vehicle wheels, wind turbines), neither the influence of operating parameters, nor the influence of structural parameters over the observed angular speed variations have been clearly identified. However, the implementation of effective tools for condition monitoring prospects requires a deep understanding of these interactions. In this regard, a test bench has been designed to allow defective bearing monitoring through IAS observation of a simple shaft running under varying loads and speeds, the system being simple enough to be easily described in various kind of mechanical or phenomenological models. The aim of this paper is to present a better understanding of the relationships between the speed variation induced by the monitored fault, the structural response and the observed phenomena. In the first part results obtained for a healthy bearing will be analyzed. These initial results serve as a reference for analysis of the results obtained with bearing defects. Coupled with dynamic modeling, they will also highlight the existence of a low frequency torsion mode. The results of this first part also highlight the wider interest of the IAS analysis for the study of rotating systems. In a second part, the measurements are performed with bearings having spalling type defects on their outer ring. The aim of this section is to estimate the influence of operating conditions on IAS monitored indicators. All these results will provide further phenomenological explanations of coupling between bearing fault and rotating speed.
Fichier non déposé

Dates et versions

hal-04710782 , version 1 (26-09-2024)

Identifiants

Citer

Adeline Bourdon, Hugo Andre, Didier Remond. Detection of Bearing Spa fling Faults Using IAS Monitoring System - Experimental Studies on the Influence of Operating and Environmental Parameters. DAMAGE ASSESSMENT OF STRUCTURES X, PTS 1 AND 2, Jul 2013, Seestrasse 24c, BACH, Switzerland. pp.433+, ⟨10.4028/www.scientific.net/KEM.569-570.433⟩. ⟨hal-04710782⟩
0 Consultations
0 Téléchargements

Altmetric

Partager

More