Molten salt reactors (MSRs) are Generation IV nuclear reactor concepts gaining significant research interest worldwide. The present work proposes a methodology for the definition and optimization of the MSR operating conditions and control strategy. The proposed methodology employs a novel 0D steady-state model, the multi-physics system-scale MOSAICS (MOlten SAlt Incompressible Calculation System) model and a Global Sensitivity Analysis (GSA) method based on Hilbert-Schmidt Independence Criterion indices. The methodology was then applied to the ARAMIS (Advanced Reactor for Actinides Management in Salt) fast-spectrum chloride-salt burner reactor. Two alternative control strategies are proposed in order to achieve target margins to the salt freezing and structure material limit temperatures during normal operation, plus a 20 % power variation per minute load-following objective. The performance of the control strategies was assessed through comparison with the natural behavior during a load-increasing transient, as well as during Unprotected Transient Over-Power (UTOP) and Station Blackout (SBO) accidents. Controlled load variation transients are observed to reduce overall temperature variation rates throughout the salt circuits, while the inclusion of a variable fuel flow from the reactor commands can further limit these fluctuations. However, the selected operating conditions exhibited insufficient margins to freezing or the materials limit temperature under unprotected accident conditions. GSA enabled the derivation of correlations to characterize the dynamic response of MSRs to the accidents. Based on the observed reactor response to the various transients, potential modifications to the ARAMIS design and control strategies are proposed.