Real-time distributed monitoring of pressure and shock velocity by ultrafast spectrometry with Chirped Fiber Bragg Gratings: Experimental vs calculated wavelength-to-pressure sensitivities in the range [0–4 GPa] - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Applied Physics Année : 2018

Real-time distributed monitoring of pressure and shock velocity by ultrafast spectrometry with Chirped Fiber Bragg Gratings: Experimental vs calculated wavelength-to-pressure sensitivities in the range [0–4 GPa]

Suivi en temps réel de la pression et de la vitesse de choc par spectrométrie ultra-rapide à l'aide de réseaux de Bragg à périodes variables : sensibilités en pression calculées et expérimentales dans la gamme [0 - 4 GPa]

Y. Barbarin
A. Lefrançois
  • Fonction : Auteur
M. Balbarie
  • Fonction : Auteur
F. Sinatti
  • Fonction : Auteur
A. Osmont
  • Fonction : Auteur
J. Luc
  • Fonction : Auteur
K. Woirin
  • Fonction : Auteur

Résumé

Fiber Bragg Gratings (FBGs) are gaining acceptance as velocity/pressure gauges in the fields of detonation and shock physics on account of their sensitivity, small size, flexibility, electromagnetic immunity, and wavelength-encoded feature. Chirped FBGs (CFBGs) are investigated as wavelength-to-position discriminators with the purpose of monitoring pressure/velocity profiles over a distance range of typically 100 mm. The use of CFBGs simplifies both sensor deployment and data retrieval and finally improves the accuracy due to the increased number of measurement data. In this paper, the metrological performance of CFBGs used as in situ distributed shock pressure/velocity gauges is investigated both theoretically and experimentally in a planar shock loading configuration with an aluminum-based flyer and target. In the intermediate range for shock stress, i.e., less than the Hugoniot Elastic Limit (HEL) of silica, CFBGs provide simultaneous measurements of both shockwave velocity and stress within the target material. A Bragg wavelength-to-stress model is proposed that takes into account (i) the state-of-stress within the target material, (ii) the stress coupling coefficient due to imperfect impedance matching between the target material and the silica fiber, (iii) the conversion of the state-of-stress into a state-of-strain within the silica fiber, and (iv) the conversion of strain data into observable Bragg wavelength shifts. Finally, the model also takes into account the pressure dependence of constitutive parameters for silica and aluminum. Experiments were performed in planar shock loading using CFBGs as stress gauges, bonded along the target axis with Araldite glue. 6061-T6 aluminum flyers were launched at several velocities by a gas gun onto targets of the same material. A free-space Czerny-Turner (CT) spectrometer and an integrated-optics Arrayed-Waveguide Grating (AWG) were both used as dynamic spectrum analyzers. Experimental Bragg wavelength shifts agree well with theoretical predictions for both elastic and hydrodynamic planar shock loading of 6061-T6 aluminum, opening up large perspectives for shock physics experiments.
Fichier principal
Vignette du fichier
article_Magne_JAP_FBG_pressure_HAL.pdf (1.9 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Licence : CC BY - Paternité

Dates et versions

hal-04559057 , version 1 (25-04-2024)

Licence

Paternité

Identifiants

Citer

Sylvain Magne, Y. Barbarin, A. Lefrançois, M. Balbarie, F. Sinatti, et al.. Real-time distributed monitoring of pressure and shock velocity by ultrafast spectrometry with Chirped Fiber Bragg Gratings: Experimental vs calculated wavelength-to-pressure sensitivities in the range [0–4 GPa]. Journal of Applied Physics, 2018, 124 (14), pp.145902. ⟨10.1063/1.5031832⟩. ⟨hal-04559057⟩
0 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More