3D Printing of recycled plastic demonstrator - Archive ouverte HAL Accéder directement au contenu
Rapport Année : 2023

3D Printing of recycled plastic demonstrator

Démonstration d'une approche DIT pour l'impression 3D de plastiques recyclés

Résumé

This report describes the open manufacturing demonstration facility of "3D printing of recycled plastic demonstrator' developed in the INEDIT project. The main goal is to validate the logistical and technical feasibility of recycled assets to be used in the Do-It-Together (DIT) approach. Therefore, a complete technical description is presented to transform certain plastic wastes into functional objects using 3D printing and desktop plastic injections through multiple experimentations. The activities were oriented to produce objects for the purpose of 1) manufacturing prototypes for validation prior to production stage, 2) personalization of furniture and 3) spare parts for reparability to enlarge the life of discarded furniture. These technical and logistical elements were implemented in a recycling pilot platform known locally as the 'Green FabLab' at the city of Nancy, France. The technical development was based on an open design approach in order to be replicable to other countries. The integration was validated according to Key Performance Indicators. There are two majors outcomes of the work done within task 6.4 and documented in this report: 1. Describe the methodological concept of the distributed recycling via additive manufacturing (DRAM) system oriented to the revaluation of plastic. 2. Demonstrate in a relevant environment to prove the integration of a distributed and local plastic recycling with the INEDIT process. The development of open-source technologies that enable the main stages for plastic recycling constitute a first chain validation. Moreover, the implementation and development of Use Case 3 proved to validate the technology maturity level from TRL4 to TRL6 and market readiness level from MRL 1 to 3/4 for technologies used such as the smart collector and fused granular fabrication. In addition, the creation of a local and distributed plastic recycling chain at a territorial level constitutes an important output for the impact of the project given the high level objectives of INEDIT.
Ce rapport décrit l'implementation du démonstration de fabrication ouverte du projet INEDIT, intitulée "3D printing of recycled plastic demonstrator". L'objectif principal est de valider la faisabilité logistique et technique de l'utilisation d'actifs recyclés dans l'approche Do-It-Together (DIT). Ainsi, une description technique complète est présentée pour transformer certains déchets plastiques en objets fonctionnels à l'aide de l'impression 3D et d'injections de plastique manuelle, à travers plusieurs expérimentations. Les activités étaient axées sur la production d'objets dans le but de 1) fabriquer des prototypes pour validation avant la phase de production, 2) personnaliser des meubles et 3) produire des pièces de rechange pour augmenter la durée de vie des meubles jetés. Ces éléments techniques et logistiques ont été mis en œuvre dans une plateforme pilote de recyclage localement connue sous le nom de "Green FabLab" dans la ville de Nancy, en France. Le développement technique était basé sur une approche de conception ouverte afin d'être réplicable dans d'autres pays. L'intégration a été validée selon des indicateurs clés de performance. Il y a deux principaux résultats du travail effectué dans la tâche 6.4 et documentés dans ce rapport : 1. Décrire le concept méthodologique du système de recyclage distribué via la fabrication additive (DRAM) orienté vers la revalorisation du plastique. 2. Démontrer dans un environnement pertinent pour prouver l'intégration d'un recyclage plastique distribué et local avec le processus INEDIT. Le développement de technologies open source permettant les principales étapes du recyclage du plastique constitue une première validation de la chaîne. De plus, la mise en œuvre et le développement du cas d'utilisation 3 ont permis de valider le niveau de maturité technologique du TRL4 au TRL6 et le niveau de préparation au marché du MRL 1 au 3/4 pour des technologies telles que le collecteur intelligent et la fabrication additive par extrusion granulaire. De plus, la création d'une chaîne de recyclage plastique locale et distribuée à un niveau territorial constitue une sortie importante pour l'impact du projet compte tenu des objectifs élevés d'INEDIT.
Fichier sous embargo
Pages from 2024-01-05-INEDIT_Livrable_6.4-UL.pdf (98.43 Ko) Télécharger le fichier
Fichier sous embargo
0 8 11
Année Mois Jours
Avant la publication
mercredi 8 janvier 2025
Format : Autre
Licence : CC BY NC ND - Paternité - Pas d'utilisation commerciale - Pas de modification
Commentaire : Table of content and executive summary
Fichier sous embargo
mercredi 8 janvier 2025
Connectez-vous pour demander l'accès au fichier

Dates et versions

hal-04371315 , version 1 (08-01-2024)

Licence

Paternité - Pas d'utilisation commerciale - Partage selon les Conditions Initiales

Identifiants

  • HAL Id : hal-04371315 , version 1

Citer

Fabio A. Cruz Sanchez, Cristian Caceres Mendoza, Fédoua Kasmi, Alex Gabriel, Laurent Dupont. 3D Printing of recycled plastic demonstrator: The Green FabLab use case at the Université de Lorraine. INEDIT Project - Deliverable 6.4, Université de Lorraine; European Union’s Horizon 2020 research and innovation programme. 2023, pp.60. ⟨hal-04371315⟩
23 Consultations
5 Téléchargements

Partager

Gmail Facebook X LinkedIn More