ROUGHNESS-RESOLVED LES OF ADDITIVE MANUFACTURING-LIKE CHANNEL FLOWS - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Turbomachinery Année : 2023

ROUGHNESS-RESOLVED LES OF ADDITIVE MANUFACTURING-LIKE CHANNEL FLOWS

Résumé

Abstract In the last decade, progresses in additive manufacturing (AM) have paved the way for optimized heat exchangers whose disruptive design will heavily rely on predictive numerical simulations. However, due to typical roughness induced by AM, current wall models used in steady and unsteady 3D Navier-Stokes simulations do not take into account such characteristics. For the development and assessment of novel wall models for AM, a high-fidelity roughness-resolved Large-Eddy Simulation (RRLES) database is built. This article describes the numerical setup and the methodology used for conducting RRLES, from surface generation to post-processing. In addition, three different cases representing two printing directions plus a streamwise and spanwise isotropic case are investigated. While the roughness distributions are the same in the three cases, the effective slope (ES) is very different and the impact of this parameter on turbulence and heat transfer is analyzed at different Reynolds numbers.
Fichier principal
Vignette du fichier
preprint.pdf (5.47 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04309868 , version 1 (27-11-2023)

Identifiants

Citer

Serge Meynet, Alexis Barge, Vincent Moureau, Guillaume Balarac, Ghislain Lartigue, et al.. ROUGHNESS-RESOLVED LES OF ADDITIVE MANUFACTURING-LIKE CHANNEL FLOWS. Journal of Turbomachinery, 2023, 145 (8), ⟨10.1115/1.4062245⟩. ⟨hal-04309868⟩
32 Consultations
6 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More