Shape memory through contact: Introduction of MagnetoFriction – Shape Memory Polymers (MF-SMPs) - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2022

Shape memory through contact: Introduction of MagnetoFriction – Shape Memory Polymers (MF-SMPs)

Résumé

This work introduces a new, multi-physical concept for shape memory in assembled composite structures. The concept is called magnetofriction and is based on magnetism, elasticity, contact and friction. In assemblies of permanently magnetized Magnetoactive Elastomers (MAE), the contact pressure is established by magnetic attraction forces. When the assembly is deformed, the contact surfaces slide over each other and the deformed shape is locked by the friction in the interface. A loosening of the contact causes the friction forces to vanish and each part of the assembly recovers its initial state due to the elastic forces in the materials. The contact is restored after the shape recovery. A test assembly, called Magnetofriction Ű Shape Memory Polymer (MF-SMP), is used to validate the concept experimentally. A local sliding and a shape lock are observed in three-point bending tests which proves the concept of magnetofriction. Furthermore, two solutions for the shape recovery are proposed. Magnetofriction is compared to other mechanisms to classify the new concept in the Ąeld of shape memory materials.
Ce travail introduit un nouveau concept pour la mémoire de forme dans les structures composites assemblées. Ce concept, appelé magnétofriction, est basé sur le magnétisme, lŠélasticité, le contact et le frottement. Dans les assemblages dŠÉlastomères Magnétoactifs (MAE), aimantés de façon permanente, la pression de contact est établie par des forces dŠattraction dŠorigine magnétique. Lorsque lŠassemblage est déformé, les surfaces en contact glissent lŠune sur lŠautre et la forme déformée est ensuite verrouillée par la friction dans lŠinterface. Un relâchement du contact fait disparaître les forces de friction et chaque partie de lŠassemblage retrouve son état initial grâce aux forces élastiques des matériaux. Le contact peut être rétabli quand les pièces ont récupéré leur forme initiale. Un assemblage de test, appelé MagnétoFriction - Polymère à Mémoire de Forme (MF-PMF), est utilisé pour valider le concept expérimentalement. Le glissement local et le verrouillage de la forme sont observés dans les tests de Ćexion en trois points ce qui prouve le concept de magnétofriction. Deux solutions pour la récupération de la forme initiale sont proposées. Par ailleurs, la magnétofriction est comparée à dŠautres mécanismes pour classer ce nouveau concept dans le domaine des matériaux à mémoire de forme.
Fichier principal
Vignette du fichier
cfm2022_6990.pdf (632.17 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04280163 , version 1 (13-11-2023)

Identifiants

  • HAL Id : hal-04280163 , version 1

Citer

Svenja Hermann, Gaël Chevallier, Laurent Hirsinger, Morvan Ouisse. Shape memory through contact: Introduction of MagnetoFriction – Shape Memory Polymers (MF-SMPs). 25e Congrès Français de Mécanique (CFM 2022), Aug 2022, Nantes, France. ⟨hal-04280163⟩
17 Consultations
6 Téléchargements

Partager

Gmail Facebook X LinkedIn More