Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Composite Structures Année : 2017

Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines

Résumé

The aim of the present paper is to propose a simple methodology to predict the failure pressure of wall loss defect metallic pipes reinforced with a polymer based composite repair system. 80% wall loss defects were manufactured into the pristine pipeline specimen and the failure pressure of the repaired pipeline was determined using hydrostatic tests and validated with the proposed methodology. The proposed methodology defines a simple expression which allows to estimate the failure pressure using only the elastic properties of materials. A more conservative value of failure pressure was obtained by using this methodology as compared to the ISO/TS 24817 standard. However, the failure pipe exhibited a plastic deformation at far away from the defect region, consequently this behaviour needs to be considered in the failure analysis for an accurate prediction of failure pressure.
Fichier non déposé

Dates et versions

hal-04267757 , version 1 (02-11-2023)

Identifiants

Citer

S. Budhe, M.D. Banea, N.R.F. Rohem, E.M. Sampaio, Silvio DE BARROS. Failure pressure analysis of composite repair system for wall loss defect of metallic pipelines. Composite Structures, 2017, 176, pp.1013-1019. ⟨10.1016/j.compstruct.2017.06.044⟩. ⟨hal-04267757⟩
4 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More