Large-scale parallel topology optimisation of three-dimensional incompressible fluid flows in a level set, anisotropic mesh adaptation framework - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Computer Methods in Applied Mechanics and Engineering Année : 2023

Large-scale parallel topology optimisation of three-dimensional incompressible fluid flows in a level set, anisotropic mesh adaptation framework

D Serret
  • Fonction : Auteur
P Meliga
E Hachem

Résumé

This papers considers the topology optimization of duct flows governed by the three-dimensional steady state Navier-Stokes equations, using anisotropic mesh adaptation to achieve a high-fidelity description of all fluid-solid interfaces. The numerical framework combines an immersed volume method solving stabilized, linear equal-order finite element formulations cast in the Variational Multiscale (VMS) framework, and level set representations of the interface, used as a posteriori anisotropic error estimator to minimize the interpolation error under the constraint of a prescribed number of nodes in the mesh. Both the resolution and remeshing steps are performed in a massively parallel framework allowing for the optimization of large-scale systems. In particular, an original parallelization strategy is used for mesh adaptation, that combines local remeshing performed sequentially and independently on each subdomain with blocked interfaces, and constrained repartitioning to optimally move the interfaces between subdomains in an optimal way, both iterated until a satisfying mesh and partition are obtained. The proposed approach reduces the computational burden related to the call of the finite element solver, compared to classical optimization schemes working on uniform grids with similar mesh refinement. For a given number of nodes, it improves the accuracy in the geometric description of all layouts. Finally, it has the potential to alleviates the end user from most of the post-processing step aiming at extracting the final layout, due to ability of anisotropic adapted meshes to generate intrinsically smooth designs. Numerical results are provided for several three-dimensional problems of power dissipation minimization involving several dozen million state degrees of freedom, for which the optimal designs agree well with reference results from the literature, while providing superior accuracy over prior studies solved on isotropic meshes (in the sense that the flow is better resolved, especially in the near-wall regions, and the layouts are more smooth). The potential of the method for engineering problems of practical interest is eventually exposed by optimizing the distributor section conveying the cold fluid within the plates of a plate fin heat exchanger.
Fichier principal
Vignette du fichier
main10light.pdf (3.78 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04244684 , version 1 (16-10-2023)

Identifiants

Citer

W Abdel Nour, A Larcher, D Serret, P Meliga, E Hachem. Large-scale parallel topology optimisation of three-dimensional incompressible fluid flows in a level set, anisotropic mesh adaptation framework. Computer Methods in Applied Mechanics and Engineering, 2023, 416, pp.116335. ⟨10.1016/j.cma.2023.116335⟩. ⟨hal-04244684⟩
26 Consultations
42 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More