A 6-components mechanistic model of cutting forces and moments in milling - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Forces in Mechanics Année : 2022

A 6-components mechanistic model of cutting forces and moments in milling

Résumé

Most of the cutting models developed in the literature attest only to the presence of cutting forces in the balance of mechanical energy resulting from cutting. However, several studies [1–4] have highlighted the presence of cutting moments during machining, and particularly for milling. From a theoretical point of view, a complete energy balance must integrate all the components of the mechanical actions (forces and moments). The predictive model of this study proposes to characterize the evolution of the moments in the cutting zone for milling. The objective is to determine a model similar to the cutting forces which expresses a relationship with the chip section define by the Kc coefficient but by integrating the specific behavior of the moments. This work gives perspectives from an energetic point of view for which the part of moments in the energy balance could be substantial for specific configurations as small-radius tools or high-speed milling.
Fichier principal
Vignette du fichier
I2M_FM_2022_Jeulin.pdf (8.47 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-03982462 , version 1 (10-02-2023)

Licence

Paternité

Identifiants

Citer

Maël Jeulin, Olivier Cahuc, Philippe Darnis, Raynald Laheurte. A 6-components mechanistic model of cutting forces and moments in milling. Forces in Mechanics, 2022, 9, ⟨10.1016/j.finmec.2022.100130⟩. ⟨hal-03982462⟩
16 Consultations
21 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More