Direct integration of SAW resonators on industrial metal for structural health monitoring applications - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Smart Materials and Structures Année : 2021

Direct integration of SAW resonators on industrial metal for structural health monitoring applications

P Mengue
Connectez-vous pour contacter l'auteur
Sami Hage-Ali
Connectez-vous pour contacter l'auteur
Baptiste Paulmier
  • Fonction : Auteur
  • PersonId : 1290269
Cécile Floer
Florian Bartoli
Omar Elmazria
Connectez-vous pour contacter l'auteur

Résumé

Surface acoustic wave (SAW) sensors are very promising for structural health monitoring (SHM) applications as they have the advantages of being robust, passive (batteryless), remotely interrogated (wireless) and can even be packageless. This paper describes ultralow-profile SAW resonators that can be directly fabricated and integrated on metallic parts in industrial facilities. They are based on piezoelectric thin films (ZnO) which are directly sputtered on polished industrial titanium (Ti) and stainless steel. With this approach, no sensor glue-bonding to the target is needed, and measurement errors related to this step are avoided. Demonstrator devices have been studied numerically and experimentally. The structural properties of the ZnO thin films were characterized through x-ray diffraction and atomic force microscopy. A preferred orientation (002) was achieved with a roughness of 50 nm on the top surface. Resonators were microfabricated and their functional parameters (i.e. resonance frequency, quality factor and electromechanical coupling) were extracted through impedance measurements and fitted with a Butterworth-van Dyke model. By increasing applied temperatures (up to 450 °C) and the strain (up to 1800 μ ϵ), a linear decrease of the resonance frequency has been shown. A temperature coefficient of frequency of −46.4 ppm °C −1 and a good strain sensitivity (1.49 ppm μ ϵ −1 ) were obtained, thus making the structure promising as a high temperature and strain sensing element in industrial SHM applications.
Fichier principal
Vignette du fichier
Direct integration of SAW resonators on industrial metal for Structural Health Monitoring applications.pdf (1.07 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03920943 , version 1 (03-01-2023)

Identifiants

Citer

P Mengue, Sami Hage-Ali, S Zhgoon, Baptiste Paulmier, Cécile Floer, et al.. Direct integration of SAW resonators on industrial metal for structural health monitoring applications. Smart Materials and Structures, 2021, 30 (12), pp.125009. ⟨10.1088/1361-665X/ac2ef4⟩. ⟨hal-03920943⟩
62 Consultations
95 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More