Detector-electrode for alpha spectrometry in water sample, numerical and early feasibility investigation toward thermocompression bonding assembly process - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment Année : 2020

Detector-electrode for alpha spectrometry in water sample, numerical and early feasibility investigation toward thermocompression bonding assembly process

Résumé

This study focuses on the feasibility of a detector-electrode for direct alpha measurement in aqueous samples. Such a device could be made by adding a boron doped diamond electrode on top of a standard silicon detector, with bonding and insulating layers. The impact of these different layers has been investigated by Monte-Carlo simulation (MCNP6), to find a compromise between alpha detection of the silicon, electrode and shielding properties of the diamond. The assembly process involving thermocompression between both substrates was successfully achieved under a clean room conditions.
Fichier principal
Vignette du fichier
NIMA-D-19-00754R2.pdf (11.38 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03549016 , version 1 (11-02-2022)

Licence

Copyright (Tous droits réservés)

Identifiants

Citer

N. Schmitt, S. Colas, N. Saurel, F. Bassignot, B. Vuillemin, et al.. Detector-electrode for alpha spectrometry in water sample, numerical and early feasibility investigation toward thermocompression bonding assembly process. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2020, 953, pp.163270. ⟨10.1016/j.nima.2019.163270⟩. ⟨hal-03549016⟩
59 Consultations
16 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More