Monitoring Strength Reduction in Sandstones Associated With Fluid Substitution Using Advanced Rock Mechanics Testing - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2016

Monitoring Strength Reduction in Sandstones Associated With Fluid Substitution Using Advanced Rock Mechanics Testing

J. Sarout
J. Dautriat
C. David

Résumé

Abstract This paper presents a novel rock mechanics testing method for remotely monitoring, detecting and assessing mechanical weakening and possible sand production in sandstone reservoirs during water flooding or during drilling with water-based muds. Rock mechanics triaxial tests are conducted on sandstone reservoir samples subjected to realistic in situ stresses, pore pressure, and temperature. During these tests, in addition to the conventional stress and strain monitoring techniques, the new approach involves a combination of ultrasonic and micro-seismic monitoring techniques allowing for a remote detection and spatial localisation of the possible mechanical weakening that ultimately leads to sand production. The original testing protocol allows for the substitution of the in situ fluid by a water-based fluid with minimal impact on the in situ effective stress in the rock sample. The weakening effect of the substituting fluid can therefore be discriminated from any mechanical artefact associated with a possible reduction in the effective pressure during the substitution. Thanks to the conventional stress-strain monitoring technique, it has been observed that (i) the strength and static elastic moduli decrease when water saturates the pore space; (ii) the injection of water in a critically loaded sample initially saturated either with air or inert oil induces a drastic increase in the creep rate and the development of a mechanical instability. Thanks to the ultrasonic and micro-seismic monitoring of the fluid substitution process, it has been observed that (iii) the mechanical instability is mainly localised in the water-flooded zone; (iv) this instability corresponds to a loss of cohesion between the sandstone grains; (v) during oil substitution by water, the insability is delayed in comparison with the water injection in the dry sandstone and the loss of cohesion is less pronounced. This loss of grain-to-grain cohesion is expected to lead to sand production in weakly consolidated siliciclastic reservoirs. In addition, the injected fluids significantly affect the ultrasonic P-wave velocity: (vi) increases during oil injection; (vii) decrease during water injection. This helps in detecting the advancement of the fluid front within the rock's pore space.
Fichier non déposé

Dates et versions

hal-03480681 , version 1 (14-12-2021)

Identifiants

Citer

J. Sarout, J. Dautriat, C. David. Monitoring Strength Reduction in Sandstones Associated With Fluid Substitution Using Advanced Rock Mechanics Testing. Offshore Technology Conference Asia, Mar 2016, Kuala Lumpur, France. ⟨10.4043/26636-MS⟩. ⟨hal-03480681⟩

Collections

UNIV-CERGY
10 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More