Strategy to Optimize the Infill Structure of the Part Produced by Fused Deposition Modelling Process - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2021

Strategy to Optimize the Infill Structure of the Part Produced by Fused Deposition Modelling Process

Résumé

The objective of this paper is to optimise the internal structure of 3D printed parts produced by the Fused Deposition Modelling (FDM) process. In 3D printing, the term infill refers to the internal structure of the part. The infill design is generally uniform throughout the part. In this paper, we propose a methodology based on an iterative process using remeshing techniques coupled to Finite Element simulation (FE simulation) to control the internal structure of the part without changing the contour. The aim of this methodology is to reinforce the part in the area where the mechanical strength must be improved in order to strengthen the structure, but also to minimize the amount of material in order to minimize the printing time. The proposed method is integrated into a computational environment using the ABAQUS (6.14) and the BL2D adaptive mesher. To validate this methodology, it has been applied on a structure subjected to four-point bending. The material used for this structure is PLA (Polylactic acid).
Fichier principal
Vignette du fichier
ECCOMASS 2020 Published.pdf (898.31 Ko) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-03188034 , version 1 (01-04-2021)

Identifiants

Citer

Sashi Kiran Madugula, Laurence Moreau, Pierre-Antoine Adragna. Strategy to Optimize the Infill Structure of the Part Produced by Fused Deposition Modelling Process. 14th WCCM-ECCOMAS Congress, Jan 2021, PARIS (virtuel), France. ⟨10.23967/wccm-eccomas.2020.319⟩. ⟨hal-03188034⟩
146 Consultations
111 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More