Aerodynamic wall pressure measurement using a high temperature gradient Pirani micro-sensor - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2020

Aerodynamic wall pressure measurement using a high temperature gradient Pirani micro-sensor

Résumé

This paper presents and discusses the first demonstration of aerodynamic wall pressure measurement using a thermal Pirani effect based micro-sensor. The thermal micro-sensor is designed as a suspended micro-hot-wire separated from the substrate by a nanoscale gap, and mechanically supported by perpendicular micro-bridges. The micro-sensor was calibrated for pressure measurement from 10 kPa to 800 kPa. It was then used as aerodynamic wall pressure sensor in a turbulent boundary layer wind tunnel and successfully measured the 1.1 kPa depression occurring in the wind tunnel when the flow velocity goes up to 40 m/s.
Fichier principal
Vignette du fichier
DAAA21041.1617119728_preprint.pdf (448.87 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03187073 , version 1 (31-03-2021)

Identifiants

Citer

Cécile Ghouila-Houri, Munique Kazar Mendes, Thomas Arnoult, Romain Viard, Quentin Gallas, et al.. Aerodynamic wall pressure measurement using a high temperature gradient Pirani micro-sensor. 2020 IEEE SENSORS, Oct 2020, Rotterdam, Netherlands. pp.1-3, ⟨10.1109/SENSORS47125.2020.9278842⟩. ⟨hal-03187073⟩
55 Consultations
82 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More