A challenge for x-ray photoelectron spectroscopy characterization of Cu(In,Ga)Se2 absorbers: The accurate quantification of Ga/(Ga + In) ratio - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Thin Solid Films Année : 2019

A challenge for x-ray photoelectron spectroscopy characterization of Cu(In,Ga)Se2 absorbers: The accurate quantification of Ga/(Ga + In) ratio

Solène Béchu
Muriel Bouttemy
Jean-Louis Gentner
  • Fonction : Auteur
Arnaud Etcheberry

Résumé

CIGS (Cu(In,Ga)Se2) layers are among the more efficient photovoltaic absorbers for thin film solar cells and remain competitive in the worldwide landscape of solar cells devices and modules with also new emerging markets (flexible or metallic substrates, tandem, low or high band gap CIGS…). Their properties are governed by different key composition parameters, and among them the GGI ratio ([Ga]/[Ga]+[In])) which controls the gap value. Indeed, the GGI determination is an important metrological challenge at the surface of the CIGS layer, particularly before the buffer deposition. Using X-Ray Photoelectron Spectroscopy (XPS), we propose here a specific methodology to determine this ratio at the surface. In order to, a surface preparation of the CIGS by chemical treatments, combining an initial flattening by HBr:Br2:H2O etching with a finishing step performed in KCN:H2O, is implemented. This chemical engineering leads to a quasi "perfect" surface, flattened and cleared from surface oxide and selenide phase on which our XPS methodology for GGI determination is tested. The photopeaks choice to obtain the most coherent GGI ratio quantification is discussed. In particular we focus on the Ga3d-In4d region, situated in narrow binding energy domain, and discuss why this photopeak combination can be considered as the most adapted for a representative GGI determination. Quantitative fitting procedure of the Ga3d-In4d region is qualified on a reference epitaxial InxGa1-xAs layer and its implementation in the CIGS case is shown.
Fichier principal
Vignette du fichier
post print 2019 TSF.pdf (417.26 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03116822 , version 1 (20-01-2021)

Identifiants

Citer

Solène Béchu, Anais Loubat, Muriel Bouttemy, Jackie Vigneron, Jean-Louis Gentner, et al.. A challenge for x-ray photoelectron spectroscopy characterization of Cu(In,Ga)Se2 absorbers: The accurate quantification of Ga/(Ga + In) ratio. Thin Solid Films, 2019, 669, pp.425-429. ⟨10.1016/j.tsf.2018.11.029⟩. ⟨hal-03116822⟩
20 Consultations
178 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More