Indium Tin Oxide optical access for magnetic tunnel junctions in hybrid spintronic–photonic circuits - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Nanotechnology Année : 2020

Indium Tin Oxide optical access for magnetic tunnel junctions in hybrid spintronic–photonic circuits

Résumé

The all-optical magnetization reversal of magnetic layers, by picosecond optical pulses, is of particular interest as it shows the potential for energy-efficient and fast magnetic tunnel junction (MTJ) elements. This approach requires memory elements that are optically and electronically accessible, for optical writing and electronic read-out In this paper, we propose the integration of indium tin oxide (ITO) as a transparent conducting electrode for magnetic tunnel junctions in integrated spintronic-photonic circuits. To provide light with sufficient energy to the MTJ free layer and allow electrical read-out of the MTJ state, we successfully integrated indium tin oxide as a top transparent electrode. The study shows that ITO film deposition by physical vapor deposition with conditions such as high source power and low O 2 flow achieves smooth and conductive thin films. Increases in grain size was associated with low resistivity. Deposition of 150 nm ITO at 300 W, O 2 flow of 1 sccm and 8.10 −3 mbar vacuum pressure results in 4.8×10 −4 Ω.cm resistivity and up to 80% transmittance at 800 nm wavelength. The patterning of ITO using CH 4 /H 2 chemistry in a reactive ion etch process was investigated showing almost vertical sidewalls for diameters down to 50 nm. The ITO based process flow was compared to a standard magnetic tunnel junctions fabrication process flow based on Ta hard mask. Electrical measurements validate that the proposed process based on ITO results in properties equivalent to the standard process. We also show electrical results of magnetic tunnel junctions having all-optical switching top electrode fabricated with ITO for optical access. The developed ITO process flow shows very promising initial results and provides a way to fabricate these new devices to integrate all-optical switching magnetic tunnel junctions with electronic and photonic elements.
Fichier principal
Vignette du fichier
paper_nanotechnology_aurelien.olivier.pdf (1.43 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03111547 , version 1 (02-02-2021)

Identifiants

Citer

A Olivier, L Avilés-Félix, A Chavent, L Álvaro-Goémez, M Rubio-Roy, et al.. Indium Tin Oxide optical access for magnetic tunnel junctions in hybrid spintronic–photonic circuits. Nanotechnology, 2020, 31 (42), pp.425302. ⟨10.1088/1361-6528/ab9c56⟩. ⟨hal-03111547⟩
59 Consultations
153 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More