Reproducibility of sound-absorbing periodic porous materials using additive manufacturing technologies: Round robin study - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Additive Manufacturing Année : 2020

Reproducibility of sound-absorbing periodic porous materials using additive manufacturing technologies: Round robin study

Nicolas Dauchez
Thomas Boutin
  • Fonction : Auteur

Résumé

The purpose of this work is to check if additive manufacturing technologies are suitable for reproducing porous samples designed for sound absorption. The work is an inter-laboratory test, in which the production of samples and their acoustic measurements are carried out independently by different laboratories, sharing only the same geometry codes describing agreed periodic cellular designs. Different additive manufacturing technologies and equipment are used to make samples. Although most of the results obtained from measurements performed on samples with the same cellular design are very close, it is shown that some discrepancies are due to shape and surface imperfections, or microporosity, induced by the manufacturing process. The proposed periodic cellular designs can be easily reproduced and are suitable for further benchmarking of additive manufacturing techniques for rapid prototyping of acoustic materials and metamaterials.
Fichier principal
Vignette du fichier
ArticleTomasz.pdf (23.02 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03084698 , version 1 (21-12-2020)

Identifiants

Citer

Tomasz Zieliński, Kamil Opiela, Piotr Pawłowski, Nicolas Dauchez, Thomas Boutin, et al.. Reproducibility of sound-absorbing periodic porous materials using additive manufacturing technologies: Round robin study. Additive Manufacturing, 2020, 36, pp.101564. ⟨10.1016/j.addma.2020.101564⟩. ⟨hal-03084698⟩
99 Consultations
32 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More