Characterisation of the Layer Pressing Strategy for Concrete 3D Printing - Archive ouverte HAL Accéder directement au contenu
Chapitre D'ouvrage Année : 2020

Characterisation of the Layer Pressing Strategy for Concrete 3D Printing

Paul Carneau
Romain Mesnil
Olivier Baverel
  • Fonction : Auteur
  • PersonId : 1031556

Résumé

3d printing of cementitious material by pressing layers during the extrusion is a strategy that requires a rather low initial yield stress so the material can deform without cracking. It allows to perfectly control the height of the layer and gives freedom in the orientation of the printing head and of the layer allowing for a wider range of printable geometry than the classic so-called "infinite brick" extrusion. This strategy has however some drawbacks as pressing the material on the previous layers may lead to a deformation of the sub-layers and even failure of the structure. In this work; we make a first step into understanding forces involved in such a process and measure their dependency on material fresh properties and printing parameters.
Fichier principal
Vignette du fichier
carneau_paul_133_final.pdf (14.02 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03026566 , version 1 (26-11-2020)

Identifiants

Citer

Paul Carneau, Romain Mesnil, Nicolas Ducoulombier, Olivier Baverel. Characterisation of the Layer Pressing Strategy for Concrete 3D Printing. Freek P. Bos; Sandra S. Lucas; Rob J.M. Wolfs; Theo A.M. Salet. Second RILEM International Conference on Concrete and Digital Fabrication, 28, Springer, pp.185-195, 2020, RILEM Bookseries, 978-3-030-49915-0. ⟨10.1007/978-3-030-49916-7_19⟩. ⟨hal-03026566⟩
94 Consultations
79 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More