Wavenumber-Based Impedance Eduction with a Shear Grazing Flow - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue AIAA Journal Année : 2020

Wavenumber-Based Impedance Eduction with a Shear Grazing Flow

Résumé

While intrinsic by definition, the impedance measured by impedance eduction has been shown to depend on the direction of the incident waves relative to the mean flow. The purpose of the present work is to evaluate whether part of the observed differences could stem from a biased wavenumber definition made during the impedance eduction process. Comparisons are made between the results of impedance eductions with uniform flow and the Ingard-Myers boundary condition, with the 1D linearized Euler equations and with the 2D linearized Euler equations, i.e., in the cross section. Both numerical synthetic data and experimental data are used for the eduction of two sample liners, with bulk Mach numbers ranging from 0 to 0.3, and at frequencies ranging from 400 to 3000 Hz. Results show that for a rectangular cross-section duct, the knowledge of the 2D flow profile in the cross section is valuable for impedance eduction. Using only 1D flow profiles bias the educed impedance estimation.
Fichier principal
Vignette du fichier
DMPE19112.1591350044_postprint.pdf (2.49 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02859909 , version 1 (08-06-2020)

Identifiants

Citer

Rémi Roncen, Estelle Piot, Fabien Méry, Frank Simon, Michael G Jones, et al.. Wavenumber-Based Impedance Eduction with a Shear Grazing Flow. AIAA Journal, 2020, pp.1-11. ⟨10.2514/1.J059100⟩. ⟨hal-02859909⟩

Collections

ONERA
29 Consultations
80 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More