Degradation assessment of polyethylene-based material through electrical and chemical-physical analyses - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Energies Année : 2020

Degradation assessment of polyethylene-based material through electrical and chemical-physical analyses

Résumé

The usability of any material hinges upon its stability over time. One of the major concerns, focusing on polymeric materials, is the degradation they face during their service life. The degradation mechanisms are deeply influenced by the aging temperature to which the material is subjected. In this paper, low-density polyethylene (LDPE) flat specimens were thermally aged under two different temperatures (90 °C and 110 °C) and analyzed. Specimens were characterized through both the most common mechanical and chemical measurements techniques (e.g., tensile stress, thermal analyses, oxidation induction time) and electrical measurements (dielectric spectroscopy, in particular), which are examples of non-destructive techniques. As a result, a very spread characterization of the polyethylene-based materials was obtained and a very good correlation was found to exist between these different techniques, highlighting the possibility of following the aging degradation development of polymers through electrical non-destructive techniques.
Fichier principal
Vignette du fichier
PIMM_E_2020_SURACI.pdf (1.23 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02539444 , version 1 (10-04-2020)

Identifiants

Citer

Simone Vincenzo Suraci, Davide Fabiani, Laura Mazzocchetti, Loris Giorgini. Degradation assessment of polyethylene-based material through electrical and chemical-physical analyses. Energies, 2020, 13 (3), pp.1-11. ⟨10.3390/en13030650⟩. ⟨hal-02539444⟩
59 Consultations
294 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More