Article Dans Une Revue International Journal of Advanced Manufacturing Technology Année : 2013

The influence of laser assistance on the machinability of the titanium alloy Ti555-3

Résumé

The Ti533-3 alloy is a new titanium alloy which is starting to see increased use in the aeronautical domain to improve the durability of components and to optimize the weight/resistance ratio. This alloy is characterized by greater resistance compared to the more commonly used titanium alloys such as Ti6Al4V. However, a disadvantage of the Ti533-3 alloy is that it is very difficult to machine. In this work, the use of laser-assisted machining has been tested to improve chip formation by a thermal softening phenomenon and to improve the machining productivity of the alloy. A parametric investigation of laser assistance on the machinability of the Ti555-3 titanium alloy shows that: (1) the cutting forces can be greatly decreased if the surface temperature is high; (2) the thermal gradient induced by laser heating modifies the surface integrity in terms of strain hardening and residual stresses in the workpiece; and (3) the chip formation mechanisms are also changed, by increasing the sawteeth frequency when using laser assistance

Fichier principal
Vignette du fichier
LAMPA_IJAMT_BRAHAMBOUCHNAK_2013.pdf (882.8 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Licence
Loading...

Dates et versions

hal-02486086 , version 1 (20-02-2020)

Licence

Identifiants

Citer

Tarek Braham-Bouchnak, Guénaël Germain, Anne Morel, Jean-Lou Lebrun. The influence of laser assistance on the machinability of the titanium alloy Ti555-3. International Journal of Advanced Manufacturing Technology, 2013, 68 (9-12), pp.2471-2481. ⟨10.1007/s00170-013-4855-7⟩. ⟨hal-02486086⟩
46 Consultations
232 Téléchargements

Altmetric

Partager

  • More