Viscoelastic properties of multi-walled carbon nanotube/epoxy composites using two different curing cycles - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Materials & Design Année : 2010

Viscoelastic properties of multi-walled carbon nanotube/epoxy composites using two different curing cycles

Résumé

Along with carbon nanotubes (CNT) morphology, impurity, and functionalization, polymer curing cycle is another important factor in determining the mechanical properties of the CNT/polymer composite samples. This work investigates the effect of two different curing cycles on mechanical and thermo-mechanical properties of the nanotube in the composite in order to optimize the curing condition in term of time and temperature. Nanocomposite samples were prepared by mixing multi-wall carbon nanotubes with epoxy resin using sonication method. The mechanical and viscoelastic properties of the resulting composite samples were evaluated by performing tensile and dynamic mechanical thermal analyses (DMTA) test. The results indicate that the mechanical and viscoelastic properties of pure epoxy and composite samples have been affected by the condition curing process. Concerning viscoelastic modeling, the COLE-COLE diagram has been plotted by the result of DMTA tests. These results show a good agreement between the Perez model and the viscoelastic behavior of the composite.
Fichier principal
Vignette du fichier
PIMM_ MD_2010_TCHARKHTCHI.pdf (602.48 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02456698 , version 1 (10-02-2020)

Identifiants

Citer

Arash Montazeri, Alireza Khavandi, Jafar Javadpour, Abbas Tcharkhtchi. Viscoelastic properties of multi-walled carbon nanotube/epoxy composites using two different curing cycles. Materials & Design, 2010, 31 (7), pp.3383-3388. ⟨10.1016/j.matdes.2010.01.051⟩. ⟨hal-02456698⟩
25 Consultations
199 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More