Microfabricated high temperature sensing platform dedicated toscanning thermal microscopy (SThM) - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Sensors and Actuators A: Physical Année : 2018

Microfabricated high temperature sensing platform dedicated toscanning thermal microscopy (SThM)

Résumé

The monitoring of heat flux is becoming more and more critical for many materials and structures approaching nanometric dimensions. Scanning Thermal Microscopy (SThM) is one of the tools available for thermal measurement at the nanoscale and requires calibration. Here we report on a micro-hotplate device made of a platinum heater suspended on thin silicon nitride (SiN) membranes integrating specific features for SThM calibration. These heated reference samples can include a localized resistive temperature sensors (RTD) or standalone platinum membranes (typically 10 × 10 μm2) on which the temperature can be measured precisely. This functional area is dedicated to (1) estimate the thermal resistance between the SThM tip and hot surface contact; and to (2) evaluate the perturbation induced by the probe on the heat dissipation when the contact measurement is performed. The thermal design of these low-power calibration chips, their fabrication, including sensitive RTDs patterned using e-beam technology, as well as their electro-thermal and electro-mechanical characterizations are presented. Robust operation of the chips up to 500 °C has been demonstrated with their membrane mechanically stable up to 250 °C and a low-power consumption of 16 mW at this operating temperature. The temperature mapping of the active areas was performed using two physical principles: local SThM temperature measurement using a thermocouple-based micro-probe and optical imaging using Near-Infrared (NIR) microscopy. Measurements coupling on one hand SThM probe and the integrated RTD and, on the other hand, SThM probe with optical imaging, validated the functionality of the calibration chips. The latter open new perspectives in the calibration of SThM probes.
Fichier non déposé

Dates et versions

hal-02380788 , version 1 (26-11-2019)

Identifiants

  • HAL Id : hal-02380788 , version 1

Citer

Tran Phong Nguyen, Etienne Lemaire, Sébastien Euphrasie, Laurent Thiery, Damien Teyssieux, et al.. Microfabricated high temperature sensing platform dedicated toscanning thermal microscopy (SThM). Sensors and Actuators A: Physical , 2018, 275, pp.109 - 118. ⟨hal-02380788⟩
18 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More