The effect of impurities, Sr additions and cooling rate on the microstructural evolution of high-purity Al-10Si-0.3Fe and corresponding impure commercial alloys is examined by optical microscopy and in situ by X-ray synchrotron 3D tomography. At fast cooling rate (similar to 470 K min(-1)) the presence of impurities decreases the growth rate of primary Al dendrites and enables formation of the beta phase. Besides a modification of the eutectic Si, the addition of Sr prevents the formation of the beta phase and increases the growth rate of Al dendrites. A low cooling rate (similar to 1 K min(-1)) leads to the formation of alpha, gamma, delta and beta intermetallic phases. In all four alloys, the dominant phase is the delta phase, regardless of commercial impurities or the Sr level. Intermetallic phases formed during slow cooling rates are much coarser than those formed during fast cooling and they have different morphologies. Our results suggest that the velocity of growth and the final morphology and size of the intermetallic phases are mainly determined by diffusional processes which in turn are controlled by the cooling rate. (c) 2018 Elsevier B.V. All rights reserved.