Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Materials Science and Engineering: A Année : 2016

Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy

K. Moussaoui
Stéphane Segonds
Walter Rubio
Michel Mousseigne

Résumé

A study is conducted into the measurement by X-ray diffraction of residual stresses in Ti6Al4V. This measurement method is now widely used but its possibilities and limits when applied to titanium alloy are poorly defined, especially as far as measurement accuracy and reliability are concerned. Experimental set-ups for tensile and compression stresses were developed. These assemblies and the measuring system were validated on a reference test coupon of 316L steel. Test campaigns highlighted the difficulties encountered with this method when applied to Ti6Al4V. Repeatability, the influence of the load and the measuring system parameters as also material constants on experimental measurements are explored. Finally, a method to calculate the offset ratio between the stress measured and the theoretical stress is proposed.
Fichier non déposé

Dates et versions

hal-01950787 , version 1 (11-12-2018)

Identifiants

  • HAL Id : hal-01950787 , version 1

Citer

K. Moussaoui, Stéphane Segonds, Walter Rubio, Michel Mousseigne. Studying the measurement by X-ray diffraction of residual stresses in Ti6Al4V titanium alloy. Materials Science and Engineering: A, 2016, 667, pp.340--348. ⟨hal-01950787⟩
34 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More