Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach - Archive ouverte HAL Access content directly
Journal Articles International Journal of Advanced Manufacturing Technology Year : 2018

Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach

Abstract

This paper presents an Off-line Gain Adjustment (OGA) approach to reduce contour error in 5-axis high speed machining. The proposed contour error formulation is based on the estimation of tool contact points and the OGA is inspired from the idea of Model Predictive Control (MPC). The control gains used in the position loop of servo drives are optimally adjusted off-line to reduce the contour error for the considered trajectory. The obtained gain profiles are computed preserving axis kinematic limitations, stability criterion of servo drives and the motor current constraints. The OGA is developed thanks to a validated machine simulator. The simulation results prove that the OGA reduces significantly the contour error in 5-axis high speed machining.
Fichier principal
Vignette du fichier
Duong et al. 2018.pdf (1.58 Mo) Télécharger le fichier
Origin : Files produced by the author(s)
Loading...

Dates and versions

hal-01908400 , version 1 (30-10-2018)

Identifiers

Cite

Tan-Quang Duong, Pedro Rodriguez-Ayerbe, Sylvain Lavernhe, Christophe Tournier, Didier Dumur. Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach. International Journal of Advanced Manufacturing Technology, 2018, 100, pp.3113-3125. ⟨10.1007/s00170-018-2859-z⟩. ⟨hal-01908400⟩
126 View
386 Download

Altmetric

Share

Gmail Facebook X LinkedIn More