Enhanced magnetoelectric voltage in ferrite/PZT/ferrite composite for AC current sensor application - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Materials Science: Materials in Electronics Année : 2018

Enhanced magnetoelectric voltage in ferrite/PZT/ferrite composite for AC current sensor application

Résumé

In this paper, we report the fabrication of a rare-earth free current sensor based on a PZT/NiCoZn-ferrite magnetoelectric (ME) trilayer composite disk. To improve the sensitivity of the sensor, the structure uses an in-plane series connection, which increases the ME voltage by two for a fixed volume. Then, we propose a full characterization of the sensor : electrical modeling, low and high frequency limits, sensitivity, linearity, distortion and resolution. The device is also evaluated under sinus, square, and triangle waveform currents, which are excitation signals commonly used in the field of electrical engineering. The current sensor shows high current sensitivity (90 mV/A), good linearity from 0.001 A to 30 A and low added impedance (0.01 Ω) in a frequency range of 10 Hz-30 kHz for a very compact structure (4 cm 3). It also exhibits a high resolution of 1 mA (for a 1 A peak signal) and good stability.
Fichier principal
Vignette du fichier
AubertMainSpringerOPEN.pdf (7.65 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01841115 , version 1 (17-07-2018)

Identifiants

Citer

Alex Aubert, V. Loyau, G. Chaplier, F. Mazaleyrat, M. Lobue. Enhanced magnetoelectric voltage in ferrite/PZT/ferrite composite for AC current sensor application. Journal of Materials Science: Materials in Electronics, 2018, ⟨10.1007/s10854-018-9576-0⟩. ⟨hal-01841115⟩
88 Consultations
110 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More